The common hospital ward doors we see are very simple and elegant, and have been in use for a long time. There are various styles of ward doors, but they can sometimes be damaged. What methods can we use to save them from damage?

　　1、 Deformation

Reason:

Due to the influence of climate, the expansion of wood or paint causes the door to deform

2. Deformation caused by high moisture content in wood

3. Problems caused by long-term exposure of products to the sun

Solution: Mild deformation can be treated with compression, and it is necessary to return to the factory in severe cases.

2、 Cracks, shrinkage, and collision in the ward door

Reason:

1. Cracks in logs can be caused by severe impact during weather or installation, and pressure can cause cracks (usually in door frames).

2. Due to the thermal expansion and cooling characteristics of the wood between door frames, door frame lines, and door frame lines, there may be some degree of shrinkage joints affected by humidity and temperature.

3. Carelessness during transportation may cause the product to collide, dent, or damage the door corners during installation. The fixation of Hospital A door and door frame should be firm, and one of the characteristics of Hospital A door is frequent opening and closing.

Solution: Cracks, shrinkage, and collisions can generally be repaired with the merchant's paint repair agent. If the area is large or the damage is severe, the beauty repairman in wooden door A will also repair it.

3、 Bubbling and delamination

Reason: During the processing, high temperature, uneven glue, or wood shrinkage are the causes.

Solution:

If it's not very serious, the beautician can handle re polishing and repainting on site. If it cannot be repaired or the bubble continues to spread, it is recommended to place an order.

4、 Automatic switch

Under normal circumstances, if installed in place and the wall is upright, the door should be able to maintain an angle when opened, but some doors may automatically open or close.

Reason: The vertical orientation of the door may be incorrect or the wall itself may not be standard, which can lead to this situation

Solution: Workers can use infrared horizontal adjustment to adjust the door frame and door fan when installing the ward door. Regardless of whether it is a standard wall or not, the door cover must be installed vertically to facilitate the vertical installation of the door leaf.

　　5、 The gap between the door frame line and the wall

Phenomenon: After the door is installed, it does not tightly adhere to the wall, but rather has some gaps, and the light colored door is more prominent. The fixation of Hospital A door and door ring should be firm, and one of the characteristics of Hospital A door is frequent opening and closing.

Reason: Firstly, check if the door cover is flat. If there is no problem with the door frame, it indicates that there is a problem with the wall. There is a significant thickness error on both sides and top of the opening wall.

Solution: The problem with the wall belongs to the quality of early construction, but if it is a dark colored door armor with unclear gaps, it is recommended not to deal with it. If it is light colored, white glass glue can be used for sewing.

The above are the possible problems that may occur with the ward door. We can repair and improve them through clever methods. If there is any damage, we do not need to rush to contact specialized manufacturers in a timely manner. They will provide good after-sales service and rationally consider the damage to the ward door.