Due to the hospital being a special place with a large number of patients and crowds every day, the hospital's dedicated doors need to have flame retardant, corrosion-resistant, moisture-proof, and anti-collision properties. Due to the high traffic volume in the hospital, it is inevitable that the ward doors will slam shut, causing some trouble. Can you solve the problem with the sick door? Next, let's take a look at common malfunctions and their solutions together with hospital door manufacturers.

　　1. The ward door is deformed. reason:

① Due to the influence of weather, the expansion force of wood or paint causes product deformation.

② Product deformation caused by high moisture content in wood.

③ Problems caused by prolonged exposure to sunlight

Solution: Minor deformation can be repaired by applying pressure, and in severe cases, it should be returned to the factory.

2. The ward door cracked, shrunk, and made a loud bang. The reasons are as follows:

① Cracks in logs can occur during installation due to weather or strong vibrations, and pressure can cause cracks (usually on the door line).

② Due to the thermal expansion and contraction characteristics of wood between door frames, door frame lines, and door frame lines, certain shrinkage joints may occur under the influence of moisture and temperature.

③ During the transportation process, accidental impact of the product during installation may result in pockmarks or damage to the door corners.

Solution: Cracks, shrinkage, and general bumps can be repaired with the dealer's own paint repair agent. If the area is large or the damage is severe, some wooden door beauty repairers can turn decay into a miracle.

3. Bubbling and peeling from the entrance of the ward.

① Reason: High temperature during processing, uneven glue application, or wood shrinkage.

② Solution: If it's not very serious, the beautician can re polish and repaint it on the spot. If the bubbles continue to spread, it is recommended to place an order and redo. 

       The quality requirements for ward door products are high, and they should have multiple functions such as durability, high sealing, sound insulation, etc. Today, many laboratories, food factories, etc. have begun to use ward doors, which provide great convenience for daily work.