Hospitals are special places where patients seek medical treatment. The interior decoration of a hospital must first meet the functional needs of its medical services in order to provide a safe, clean, quiet, and healthy environment for patients and the hospital. So how should the door of the sick room be designed to meet the needs of the hospital? Next, let's learn about it together.
1. Aluminum alloy edge sealing: All doors, door covers, and door passage edges are sealed with aluminum alloy profiles. Compared with traditional spray painted door edge seals and PVC edge seals, this material not only has a higher price, but also has many advantages for ward doors, with almost no obvious disadvantages. It can be said to be a choice for ward doors.
2. Good scratch resistance and scratch performance of the ward door: Due to all aluminum alloy edges being sealed with corners, the door, door cover, and doorway line are wrapped at around 90 degrees. Even if they are scratched, the edges and corners of the wood will not fall off. Pit or scratch phenomenon. Fundamentally solve the problem of edge breakage during use.
3. Maintain moisture balance in the wood inside the door and cover: As the edges are tightly sealed and the corners are not damaged, there are no factors of local moisture absorption and drainage imbalance. When leaving the factory, please always maintain the moisture content of the wood inside the product (gradient moisture balance). Even if the indoor temperature and relative humidity change due to seasonal reasons or when the air conditioning is turned on, the ward doors and covers can still expand and contract in a balanced state. 4. The overall effect after installing the ward door is good: due to the use of corner wrapping and connected edge sealing, there are no glue seams, black lines, or other loose installation phenomena, and the edges of each part are horizontally and vertically connected together.
5. Prevent high humidity: Hospitals are places with high humidity. The high humidity room has toilets, washrooms, boiling water rooms, laundry rooms, etc., especially the toilets in the ward are relatively humid. Therefore, all internal entrance lines should be made of all aluminum alloy wires, except for the aluminum alloy legs used to separate these positions from the door cover. Ensure that the ward doors, door covers, and door wires are not damaged during showering and other high humidity conditions.
The above is the relevant content on the design and production of ward doors compiled by Moenko editors. I believe that after reading these, you have gained some understanding of ward doors. If you want to learn more, please continue to follow us.
