Characteristic 1: The door and door cover should be firmly fixed. One of the biggest characteristics of hospital airtight doors is frequent opening and closing. Medical personnel regularly undergo examinations, injections, dressing changes, and see doctors. The hospital's internal doors need to be opened and closed hundreds of times a day. If the door frame is not sturdy enough, the application of airtight doors is undoubtedly difficult. You have a question that was considered from the beginning of the design of medical airtight doors. Two high carbon steel square pipes are designed inside the door frame to prevent deformation caused by frequent use of the door frame. The door frame of the wing door is made of solid wood panels, and the support points of the columns avoid using steel doors for diagnosis and treatment due to deformation of the door frame.  　　Feature 2: Anti collision, scratch resistant, and corrosion-resistant. The inner doors of hospitals are inevitably hit by hard blocks such as beds and wheelchairs. Sometimes the impact is very noticeable. In addition, hospitals are public places, and violent behaviors such as kicking and closing doors are inevitable. If the compressive strength of the airtight door is insufficient, the use of such violent behavior will inevitably result in the inability to use the inner door. Disinfectants are used every day to corrode doors in the hospital, which can easily fall off and discolor. In addition, the sweat on the hands is also heavily eroded. There are quite a few visitors to the hospital, and excessive sweat will undoubtedly cause the inner door to fade. The airtight door of the professional operating room adopts a new type of "safe, antibacterial, flame-retardant HPL slate". This material not only has outstanding practical effects of scratch resistance, scratch resistance, impact resistance, wear resistance, and scratch resistance, but also has the characteristic of corrosion resistance. Pushing the airtight door can perform all normal power switches hundreds of thousands of times. Characteristic 3: Moisture and Waterproof. Daily hospital cleaning work is also a major practice for medical doors, so airtight doors should have excellent moisture resistance. The airtight door has an excellent moisture-proof solution in areas that are prone to moisture regain. The two vertical frames of the door frame are tightly attached to a part of the floor, and the moisture-proof edge has dried. Natural environment.  　　 Medical airtight doors should be sturdy, shock resistant, scratch resistant, corrosion-resistant, moisture-proof, and waterproof. This is a very basic requirement. Therefore, when choosing airtight doors, everyone should choose carefully to ensure good quality of the door body. Only in this way can medical airtight doors last longer.